This course is to summarize the state of the art of Electric Submersible Pump (ESP) technology. It included the example problems to illustrate the use of various theoretical solutions, it also listed an overview of conventional well productivity and Inflow Performance Relationship (IPR) technology and is general introduction to the latest methods of  production optimization using ESP technology.
This course compiled as aid to engineers and production people in the Petroleum Industry who have the responsibility of planning and selecting electrically driven submersible pumping equipment. Included are fundamental principles involving sizing, operation and trouble shooting of submersible pump equipment. Also included are tables, data and general information which it will be value to everyone who utilize s submersible pumping equipment.
Much material of this course has been published previously and is reassembled in this course. However, there is also a considerable amount of new material included that will assist the participants of the course  in their pump selection and operation.
Designing a submersible pump installation is not an exact science; it is mostly an art. But it is a talent which can be easily acquired if care and attention are paid to what the well is telling us, and what we want to do with the well. The well conditions vary from one well to other, but the basic information required for a design does not. What we require from a particular well must, of course, be within the limits of the well in question.
This course is mainly directed to the practicing professionals who make engineering calculations and decision on submersible pump application and troubleshooting. For managers, the course helps to review the present state of the art. It also outlined some of new method in artificial technology exist today. These gaps in technology will be useful for research engineers and research professionals to determine the areas of future research.


•    Introduction
•    Hydraulic& Electrical Fundamentals
o    Introduction
o    Hydraulic Fundamentals
o    Centrifugal Pump Hydraulics
o    Well Performance
o    Electricity Fundamentals
•    Equipment Description
o    Introduction
o    Centrifugal Pump
o    Rotary Gas Separator
o    Seal Section
o    Electrical Submersible Motor
o    Generalized Motor Composite Curves
o    Motor Controllers
o    VSC Effects on ESP Components
o    Down hole Pressure and Temperature Monitors
o    Transformers
o    Junction Box
o    Wellhead
o    Check Valve
o    Drain Valve
o    Backspin relay
o    Centralizer
o    Cable
o    Cable Bands
o    Motor Lead Extension
•    Typical ESP Applications
o    Introduction
o    Shrouded Configuration
o    Booster Pump
o    Direct Production-Injection-System
o    Horizontal Injection System
o    Cantle slopeâ Injection System
o    ESP Installation with Deep Set Packer
o    ESP Installation with “Y” Tool
o    Bottom Intake Booster Pump
o    Operation of Submersible Pumps in Harsh Environments
•    Equipment Sizing
o    Introduction
o    Basic Data Required
o    Sizing Procedure High-Water-Cut
o    Sizing example : High-Water-Cut
o    Effect of Viscosity on Centrifugal Pump Performance
o    Sizing Procedure for Viscous Fluids
o    Sizing Example: Viscous Fluids
o    Sizing Procedure High GOR
o    Sizing Example High GOR
o    Sizing Procedure Variable Speed
o    Sizing Example: Variable Speed
•    Installation Maintenance and Trouble shooting
o    Introduction
o    Equipment Transportation
o    Equipment Handling
o    Well Preparation
o    Installation of Down hole Equipment
o    Installation of Surface Equipment
o    Starting  ESP
o    Testing
o    Data Gathering
o    Re-running Equipment
o    Economic Evaluation
o    Failure Analysis
o    Ammeter Technology
o    Field Checkout
o    ESP Troubleshooting Chart
•    Engineering Data
o    Electrical Terms and Definition
o    Useful Formulas
o    Relationships Regarding Flow and Pressure drops in Pipes
o    Temperature Rise in Pumps
o    Measurement for Water Flow
o    Areas of Circles
o    Conversion Factors
o    Temperature Conversion Table
o    Fundamental Unit of Length, Area, Volume and Mass
o    Conversion Factors For Units of Energy
o    Casing and Tubing Sized and Capacities
o    Stretch of  Suspended Casing, Tubing or Drill Pipe
o    Tubing Weight in Fluid
o    Hydrostatic Head
o    Well Temperature versus Current
o    Absolute Viscosity of Gas-Free Crude Oil, Centipoises
o    Absolute Viscosity of Gas-Saturated Crude Oil, Centipoises
o    Pressure Loss Charts
o    Flow Loss due to Friction in API. Pipe (U.S)
o    Inflow Performance relationship Equations
•    Installation, Operating And Troubleshooting The Pump
•    Cases study and discussion



Peserta dapat diikuti oleh semua yang tertarik pada bidang ini. Selain itu juga dapat diikuti oleh semua yang ingin mengatahui dan mendalami tentang bidang ini.


Instruktur dalam Pelatihan dan Training ini akan dibawakan oleh seorang yang ahli dalam bidang ini.


1. Presentasi

2. Diskusi antar peserta

3. Studi kasus

4. Simulasi

5. Evaluasi

6. Konsultasi dengan instruktur

Jadwal Pelatihan Lokal Media Training 2024 :

Batch 1 : 03 – 04 Januari 2024 | 16 – 17 Januari 2024 || Batch 2 : 06 – 07 Februari 2024 | 20 – 21 Februari 2024

Batch 3 : 05 – 06 Maret 2024 | 19 – 20 Maret 2024 || Batch 4 : 03 – 04 April 2024 | 23 – 24 April 2024

Batch 5 : 07 – 08 Mei 2024 | 21 – 22 Mei 2024 || Batch 6 : 05 – 06 Juni 2024 | 25 – 26 Juni 2024

Batch 7 : 09 – 10 Juli 2024 | 23 – 24 Juli 2024 || Batch 8 : 06 – 07 Agustus 2024 | 20 – 21 Agustus 2024

Batch 9 : 04 – 05 September 2024 | 18 – 19 September 2024 || Batch 10 : 08 – 09 Oktober 2024 | 22 – 23 Oktober 2024

Batch 11 : 06 – 07 November 2024 | 26 – 27 November 2024 || Batch 12 : 04 – 05 Desember 2024 | 18 – 19 Desember 2024

Jadwal Pelatihan Lokal Media


    • MALANG
    • BALI
    • LOMBOK – NTB

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan Lokal Media Training:

  1. Investasipelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta
  2. Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Lokal Media Training:

  1. Hotel
  2. Tempat Pelatihan
  3. Module / Handout
  4. FREE Flashdisk
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training)
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner
  9. FREE Souvenir Exclusive
  10. Training room full AC and Multimedia