PELATIHAN VARIABLE FREQUENCY DRIVES

PELATIHAN VARIABLE FREQUENCY DRIVES

PELATIHAN VARIABLE FREQUENCY DRIVES

TRAINING VARIABLE FREQUENCY DRIVES

Course Description of Training Variable Frequency Drives

The objective of this variable frequency drives training course is to build confidence in the student by providing him/her with useful information and practical hands-on exercises that demonstrate the relevance of the course material.

Course Objectives:

This course is designed to enable participants to:
•    Properly Matching A Drive to A Machine
•    Choosing the Correct Motor
•    Choosing the Best Type of Variable Frequency Drive (VFD)
•    Identify & Correct Drive System Problems
•    Identify & Test Major Drive Components
•    Perform Start-Up of an AC Drive
•    Program & Adjust the Drive for Desired Operation

Course Outline Training Variable Frequency Drives

I. INTRODUCTION

   1. Evolution of Adjustable Speed Motor Control
2. Modern Types of Variable Frequency Drives

II. Mechanical Theory

   1. Horsepower Defined
2. Torque Defined
3. Example Horsepower and Torque Calculations
4. Common Types of Mechanical Loads
5. Characteristics of Variable Torque and Constant Torque Loads

III. Basic Electricity Theory

   1. Electrical/Hydraulic Circuit Analogy
2. Resistance, Voltage, and Current Defined

IV. Introduction to AC Motors

   1. Examination of Motor Nameplates and NEMA Designations
2. Locked Rotor Current and Full Load Current
3. Anatomy of a Motor
4. Magnetic Poles and Frequency as Related to Motor Speed
5. Torque Characteristics Motors Operated “Across-the-Line”
6. Torque Characteristics of Motors Operated on VFDs
7. Effects VFDs on Motor Operation and Life Expectancy

V. PWM AC Variable Speed Drives

   1. Common Types of PWM Drives
2. Examination of the Main Power Circuit
3. Electronic Component Identification
4. The PWM Wave Form
5. Voltage and Frequency Relationships and Effects on Motor Performance
6. Control of Drive System Torque and Horsepower Output
7. Torque Output Comparisons of AC Drives VS. Conventional Means of Speed Control
8. Standing Wave (Reflective Wave) Phenomena on Motor Cables
9. Disassembly of an AC Drive
10. Component Identification
11. Various Designs of Drives
12. Reassemble, Test, Start-Up of AC Drive With Proper Techniques
13. Hands-On Programming and Operation of an AC Drive and Motor
14. Adjust Minimum and Maximum Speed
15. Reset Drive to Factory Defaults
16. Adjusting Torque Output
17. General Drive Programming
18. Methods of Speed and Torque Control

VI. Applications

   1. Methods of Proper Drive Selection
2. Multi-Motor Drive Systems With Example Problem
3. Using VFDs to Eliminate Geared Speed Reducers
4. Effects of AC Drives on Geared Speed Reducers
5. Replacing Mechanical Speed Changers With VFDs

VII. Conclusion and Summary

Variable Frequency Drives

Peserta

Peserta dapat diikuti oleh semua yang tertarik pada bidang ini. Selain itu juga dapat diikuti oleh semua yang ingin mengatahui dan mendalami tentang bidang ini.

Instruktur

Instruktur dalam Pelatihan dan Training ini akan dibawakan oleh seorang yang ahli dalam bidang ini.

Metode

1. Presentasi

2. Diskusi antar peserta

3. Studi kasus

4. Simulasi

5. Evaluasi

6. Konsultasi dengan instruktur

 

Jadwal Pelatihan Lokal Media Training 2021 :

5-7 Januari 2021 | 19-21 Januari 2021 | 26-28 Januari 2021

9-10 Februari 2021 | 23-25 Februari 2021

9-11 Maret 2021 | 23-25 Maret 2021

6-8 April 2021 | 20-22 April 2021 | 27-29 April 2021

4-6 Mei 2021 | 11-13 Mei 2021 | 18-20 Mei 2021 | 25-27 Mei 2021

8-10 Juni 2021 | 22-24 Juni 2021

13-15 Juli 2021 | 20-22 Juli 2021

3-5 Agustus 2021 | 24-26 Agustus 2021

7-9 September 2021 | 21-23 September 2021

5-7 Oktober 2021 | 19-21 Oktober 2021

9-11 November 2021 | 23-25 November 2021

7-9 Desember 2021 | 14-16 Desember 2021 | 21-23 Desember 2021

Jadwal Pelatihan Lokal Media Training 2022 :

18 – 20 Januari 2022 | 25 – 27 Januari 2022

8 – 10  Februari 2022 | 15 – 17 Februari 2022 | 22 – 24 Februari 2022

2 – 4 Maret 2022 | 8 – 10 Maret 2022 | 15 – 17 Maret 2022 | 22 – 24 Maret 2022  | 29 – 31 Maret 2022

5 – 7 April 2022 | 19 – 21 April 2022

10 -12 Mei 2022 | 17 – 19 Mei 2022 | 24 – 26 Mei 2022

7 – 9 Juni 2022 | 14 – 16 Juni 2022 | 21 – 23 Juni 2022 | 28 – 30 Juni 2022

5 – 7 Juli 2022 | 12 – 14 Juli 2022 | 26 – 28 Juli 2022

2 – 4 Agustus 2022 | 9 – 11 Agustus 2022 | 23 – 25 Agustus 2022

6 – 8 September 2022 | 13 – 15 September 2022 | 20 – 22 September 2022 | 27 – 29 September 2022

4 – 6 Oktober 2022 | 11 – 13 Oktober 2022 | 18 – 20 Oktober 2022 | 25 – 27 Oktober 2022

1 – 3 November 2022 | 8 – 10 November 2022  | 15 –  17 November 2022 | 22 – 24 November 2022

6 – 8 Desember 2022 | 13 – 15 Desember 2022  | 20 – 22 Desember 2022 | 27 – 29 Desember 2022

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA
    • JAKARTA
    • BANDUNG
    • MALANG
    • SURABAYA
    • BALI
    • LOMBOK – NTB
  • IN HOUSE TRAINING
  • ONLINE TRAINING VIA ZOOM

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan Lokal Media Training:

  1. Investasipelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta
  2. Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Lokal Media Training:

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  2. FREE Akomodasi ke tempat pelatihan bagi peserta
  3. Module / Handout
  4. FREE Flashdisk
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training)
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner
  9. FREE Souvenir Exclusive
  10. Training room full AC and Multimedia

Pelatihan Terbaru

Kontak Kami

Jadwal Pelatihan

Pelatihan Unggulan