PELATIHAN VIBRATION MEASUREMENT & ANALYSIS

PELATIHAN VIBRATION MEASUREMENT & ANALYSIS

PELATIHAN VIBRATION MEASUREMENT & ANALYSIS

TRANING VIBRATION MEASUREMENT & ANALYSIS

VIBRATION MEASUREMENT & ANALYSIS

Course Description Of Training Vibration Measurement & Analysis

Condition Monitoring and in particular, Vibration Measurement and Analysis have become increasingly important in maintaining the reliability and efficiency of plant machinery during the last 20 years, due to escalating running costs.
The aim of this course is to familiarise the attendee with methods of vibration measurement and analysis and to make them aware of the concept of vibration, its causes, and consequences should the vibration continue and be allowed to increase.

Who Should Attend:

The course is targeted at technicians and engineers involved in the operation maintenance of rotating machinery. Experienced maintenance specialists also benefit from attending this course, as will those managers concerned with maintenance, scheduling and repair aspects of rotating machinery.

Course Outline Training Vibration Measurement & Analysis

•    Introduction to the concepts of vibration as related to rotating equipment.
•    Define vibration terms and units of measurement.
•    Be able to state the common causes of machinery vibration.
•    Describe standard types and applications of vibration, measurement and analysis equipment.
o    Vibration transducers
o    Vibration meters
o    Vibration analysers
•    Be able to describe and utilise vibration graphic representations
o    Trend charts
o    Vibration signatures or spectrums
o    Time wave form data
o    Orbit diagrams
•    Operate an I.R.D. 350 Analyser:
o    Carry out correct set-up procedures for the I.R.D. 350 analyser
o    Obtain unfiltered amplitude readings in velocity and displacement
o    Obtain filtered amplitude readings in velocity, displacement and frequency
o    Using vibration identification and severity charts provided, be able to predict probable causes of problems in equipment operation
•    Apply the knowledge and practical skills gained, to carry out single plane balancing using the 350 analyser, strobe light and rotor kit; i.e.
o    Take necessary readings of amplitude, frequency and phase
o    Construct a vector diagram using the data
o    Apply the new weight and position data calculated to the rotor
o    Take the new readings of amplitude, frequency and phase and compare with original
o    Repeat the sequence as necessary

Peserta

Peserta dapat diikuti oleh semua yang tertarik pada bidang ini. Selain itu juga dapat diikuti oleh semua yang ingin mengatahui dan mendalami tentang bidang ini.

Instruktur

Instruktur dalam Pelatihan dan Training ini akan dibawakan oleh seorang yang ahli dalam bidang ini.

Metode

1. Presentasi

2. Diskusi antar peserta

3. Studi kasus

4. Simulasi

5. Evaluasi

6. Konsultasi dengan instruktur

Jadwal Pelatihan Lokal Media Training 2021 :

5-7 Januari 2021 | 19-21 Januari 2021 | 26-28 Januari 2021

9-10 Februari 2021 | 23-25 Februari 2021

9-11 Maret 2021 | 23-25 Maret 2021

6-8 April 2021 | 20-22 April 2021 | 27-29 April 2021

4-6 Mei 2021 | 11-13 Mei 2021 | 18-20 Mei 2021 | 25-27 Mei 2021

8-10 Juni 2021 | 22-24 Juni 2021

13-15 Juli 2021 | 20-22 Juli 2021

3-5 Agustus 2021 | 24-26 Agustus 2021

7-9 September 2021 | 21-23 September 2021

5-7 Oktober 2021 | 19-21 Oktober 2021

9-11 November 2021 | 23-25 November 2021

7-9 Desember 2021 | 14-16 Desember 2021 | 21-23 Desember 2021

Jadwal Pelatihan Lokal Media Training 2022 :

18 – 20 Januari 2022 | 25 – 27 Januari 2022

8 – 10  Februari 2022 | 15 – 17 Februari 2022 | 22 – 24 Februari 2022

2 – 4 Maret 2022 | 8 – 10 Maret 2022 | 15 – 17 Maret 2022 | 22 – 24 Maret 2022  | 29 – 31 Maret 2022

5 – 7 April 2022 | 19 – 21 April 2022

10 -12 Mei 2022 | 17 – 19 Mei 2022 | 24 – 26 Mei 2022

7 – 9 Juni 2022 | 14 – 16 Juni 2022 | 21 – 23 Juni 2022 | 28 – 30 Juni 2022

5 – 7 Juli 2022 | 12 – 14 Juli 2022 | 26 – 28 Juli 2022

2 – 4 Agustus 2022 | 9 – 11 Agustus 2022 | 23 – 25 Agustus 2022

6 – 8 September 2022 | 13 – 15 September 2022 | 20 – 22 September 2022 | 27 – 29 September 2022

4 – 6 Oktober 2022 | 11 – 13 Oktober 2022 | 18 – 20 Oktober 2022 | 25 – 27 Oktober 2022

1 – 3 November 2022 | 8 – 10 November 2022  | 15 –  17 November 2022 | 22 – 24 November 2022

6 – 8 Desember 2022 | 13 – 15 Desember 2022  | 20 – 22 Desember 2022 | 27 – 29 Desember 2022

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA
    • JAKARTA
    • BANDUNG
    • MALANG
    • SURABAYA
    • BALI
    • LOMBOK – NTB
  • IN HOUSE TRAINING
  • ONLINE TRAINING VIA ZOOM

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan Lokal Media Training:

  1. Investasipelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta
  2. Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Lokal Media Training:

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  2. FREE Akomodasi ke tempat pelatihan bagi peserta
  3. Module / Handout
  4. FREE Flashdisk
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training)
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner
  9. FREE Souvenir Exclusive
  10. Training room full AC and Multimedia