Training Industrial VSD (Variable Speed Drive)

Training Industrial VSD (Variable Speed Drive)

Training Industrial VSD (Variable Speed Drive)

Training Industrial VSD (Variable Speed Drive)

Deskripsi Pelatihan Industrial VSD (Variable Speed Drive)

Pelatihan Industrial VSD (Variable Speed Drive)

Pumps, fans, blowers and compressors consume as much as 65% of this total. A large proportion of these applications are powered by fixed or constant speed drivers whose load demands often fluctuate. This poor match of speed and demand results in considerable wasted energy and significantly increased wear of system components. Variable speed drive technology is a cost effective method to match driver speed to load demands and is an excellent opportunity to reduce operating costs and improve overall efficiencies in your application.

This course gives you a fundamental understanding of the installation, operation and troubleshooting of variable speed drives. You will learn the basic setup of parameters, control wiring and safety precautions in installing a VSD. The various drive features such as operating modes, braking types, automatic restart and many others will be discussed in detail. You will learn the four basic requirements for a VSD to function properly with emphasis on typical controller faults, their causes and how they can be repaired.

The concluding section of the course gives you the fundamental tools in troubleshooting VSD confidently and effectively. Even though the focus of the course is on the direct application of this technology, you will also gain a thorough understanding of the problems that can be introduced by VSD such as harmonics, electrostatic discharge and EMC/EMI problems.

Tujuan

Setelah mengikuti pelatihan, diharapkan peserta mampu:

Demonstrate a sound understanding of how AC Variable Speed Drives (VSD’s) work
Install VSDs properly
Select the right VSD for a given application
Troubleshoot VSDs competently
Competently explain how flux-vector control works for drive applications understand squirrel cage induction motors
Identify the protection and control system requirements for VSD’s
Interface VSD’s with PLCs
Understand the causes of motor burnout
Deal effectively with VSD harmonics and
EMC/EMI problems

Materi Industrial VSD (Variable Speed Drive) Training

1. Introduction To Variable Speed Drives

The Need for Variable Speed Drives
Fundamental Principles of Speed Control
Efficiency, Torque, Inertia,
Horsepower/Power Factor
Torque-Speed Curves
How the motor produces Torque
Types of Variable Speed Drives
2. 3-Phase Ac Induction Motors

Basic Construction and Physical Configuration
Principles of Operation and Performance
Equivalent Circuit and Fundamental Equations
Starting, Acceleration, Running and Stopping
Power, Torque and Thermal Rating
3. Power Electronic Converters

Definitions and Basic Principles
Power Diodes and Thyristors
Principles of Communication
Power Electronic Rectifiers
Power Electronic Inverters
Gate Commutated Converters
Gate Controlled Devices – GTO, FCT, GTR, FET, IGBT
4. Electromagnetic Compatibility (EMC)

Sources of Electromagnetic Interference
Harmonics on the Power Supply side of AC Converters
The Effect of Harmonic Distortion on other connected Equipment
Methods of reducing the effect of Supply side Harmonics
Electric Motor Protection
Thermal Overload Protection – Current Sensing
Thermal Overload Protection – Direct Temperature Sensing
5. Protection Of Motors And Converters

AC Frequency Converter Protection Fault Diagnostics
Electric Motor Protection
Thermal Overload Protection – Current Sensors
Thermal Overload Protection – Direct Temperature
6. Control System For Ac Variable Speed Drives

The Overall Control System
Power Supply to the Control System
DC Bus Charging System
VSD Control Loops (Open-Loop, Closed- Loop)
Vector control and its applications Current Feedback in AC Variable Speed Drives\
Speed Feedback from the Motor
7. The Selection Of Ac Converters For Variable Speed Drive Applications

The Basic Selection Procedure
Loadability of Converter Fed induction Motors
Operation in the Constant Power Region\
The Nature of the Machine Load
Starting and Stopping VSDs (Motor Braking)
8. The Selection Of Ac Converters (Continued)

How to Calculate Acceleration Torques and Times
How to Select the correct Motor and
Converter for Pump and Fan Loads
How to Select the correct Motor and
Converter for Constant Torque Loads, such as conveyors
Summary of the Selection Procedure
9. Installation And Fault Finding Techniques

General Installation and Environmental Requirements
Power Supply Connections and Earthing
Where to install the Contactors in the Power Where to install the Contactors in the Power Circuit
Installing AC Converters into Metal Enclosures

Peserta

Peserta dapat diikuti oleh semua yang tertarik pada bidang ini. Selain itu juga dapat diikuti oleh semua yang ingin mengatahui dan mendalami tentang bidang ini.

Instruktur

Instruktur dalam Pelatihan dan Training ini akan dibawakan oleh seorang yang ahli dalam bidang ini.

Metode

1. Presentasi

2. Diskusi antar peserta

3. Studi kasus

4. Simulasi

5. Evaluasi

6. Konsultasi dengan instruktur

Jadwal Pelatihan Lokal Media Training 2021 :

5-7 Januari 2021 | 19-21 Januari 2021 | 26-28 Januari 2021

9-10 Februari 2021 | 23-25 Februari 2021

9-11 Maret 2021 | 23-25 Maret 2021

6-8 April 2021 | 20-22 April 2021 | 27-29 April 2021

4-6 Mei 2021 | 11-13 Mei 2021 | 18-20 Mei 2021 | 25-27 Mei 2021

8-10 Juni 2021 | 22-24 Juni 2021

13-15 Juli 2021 | 20-22 Juli 2021

3-5 Agustus 2021 | 24-26 Agustus 2021

7-9 September 2021 | 21-23 September 2021

5-7 Oktober 2021 | 19-21 Oktober 2021

9-11 November 2021 | 23-25 November 2021

7-9 Desember 2021 | 14-16 Desember 2021 | 21-23 Desember 2021

Jadwal Pelatihan Lokal Media Training 2022 :

18 – 20 Januari 2022 | 25 – 27 Januari 2022

8 – 10  Februari 2022 | 15 – 17 Februari 2022 | 22 – 24 Februari 2022

2 – 4 Maret 2022 | 8 – 10 Maret 2022 | 15 – 17 Maret 2022 | 22 – 24 Maret 2022  | 29 – 31 Maret 2022

5 – 7 April 2022 | 19 – 21 April 2022

10 -12 Mei 2022 | 17 – 19 Mei 2022 | 24 – 26 Mei 2022

7 – 9 Juni 2022 | 14 – 16 Juni 2022 | 21 – 23 Juni 2022 | 28 – 30 Juni 2022

5 – 7 Juli 2022 | 12 – 14 Juli 2022 | 26 – 28 Juli 2022

2 – 4 Agustus 2022 | 9 – 11 Agustus 2022 | 23 – 25 Agustus 2022

6 – 8 September 2022 | 13 – 15 September 2022 | 20 – 22 September 2022 | 27 – 29 September 2022

4 – 6 Oktober 2022 | 11 – 13 Oktober 2022 | 18 – 20 Oktober 2022 | 25 – 27 Oktober 2022

1 – 3 November 2022 | 8 – 10 November 2022  | 15 –  17 November 2022 | 22 – 24 November 2022

6 – 8 Desember 2022 | 13 – 15 Desember 2022  | 20 – 22 Desember 2022 | 27 – 29 Desember 2022

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA
    • JAKARTA
    • BANDUNG
    • MALANG
    • SURABAYA
    • BALI
    • LOMBOK – NTB
  • IN HOUSE TRAINING
  • ONLINE TRAINING VIA ZOOM

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan Lokal Media Training:

  1. Investasipelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta
  2. Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Lokal Media Training:

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  2. FREE Akomodasi ke tempat pelatihan bagi peserta
  3. Module / Handout
  4. FREE Flashdisk
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training)
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner
  9. FREE Souvenir Exclusive
  10. Training room full AC and Multimedia