Pelatihan Electrical Grounding and Shielding Electronic Systems

Pelatihan Electrical Grounding and Shielding Electronic Systems

Pelatihan Electrical Grounding and Shielding Electronic Systems

Training Electrical Grounding and Shielding Electronic Systems

Course Description Electrical Grounding and Shielding Electronic Systems

This course stresses the fundamental electromagnetic compatibility principles involved in typical grounding and shielding problems. Understanding the objectives and techniques for grounding and shielding will reduce misconceptions and allow a more systematic approach to replace trial and error methods. For example, the course explains why a signal ground is not the same as a signal return.

Also, solutions for the numerous problems caused by wiring inductance are described and demonstrated. The course emphasizes the development of logical diagnostic techniques for identifying various types of noise problems. Often, the correct identification of the problem is more difficult than the solution. The course is at an introductory level; however, some knowledge of electronic circuits and system design is assumed. Several interference mechanisms and shielding techniques are demonstrated.

Course Objectives:

This course is designed to enable participants to:

  • Define electrical ground, signal ground, and signal return
  • Describe various grounding techniques
  • Diagnose noise problems
  • Identify methods to reduce and filter noise
  • Define inductive and capacitive shielding
  • Describe techniques for reducing electromagnetic coupling
  • Select appropriate cabling
  • Identify methods to ensure impedance matching
  • Identify noise coupling mechanisms

Course Outline Electrical Grounding and Shielding Electronic Systems

I. Basic Principles of Noise Reduction

  1. Importance of wiring inductance
  2. Bandwidth of pulse waveforms
  3. Noise coupling mechanisms
  4. How to identify the mechanism
  5. Common and differential modes

II. Grounding: Why and How?

  1. What is electrical ground?
  2. Reasons for grounding
  3. Signal ground, signal return
  4. Ground grid technique
  5. Isolated grounding technique
  6. Ground loop noise reduction

III. Signal Ground Techniques

  1. Ground each current only once
  2. Unsafe signal grounding
  3. Single point versus ground grid
  4. Signal isolation techniques

IV. How to Diagnose Noise Problems

  1. Ringing, rounding, and reflections
  2. Effects of signal impedance distribution on susceptibility
  3. Practical diagnostic techniques
  4. Noise coupling examples

V. Noise Reduction Techniques

  1. Filtering and shielding
  2. Reducing mutual inductance

VI. Filtering Conducted Noise

  1. CM and DM filter techniques
  2. Improving circuit balance
  3. 1 GHZ filtering techniques
  4. DC power bus design

VII. Inductive and Capacitive Shielding

  1. Self-shielding techniques
  2. Misuse of twisted pair
  3. Grounding cable shields
  4. Shielding examples

VIII. Reducing Electromagnetic Coupling

  1. Identifying EM coupling
  2. Controlling CM currents

Electrical Grounding and Shielding Electronic Systems

Peserta

Peserta dapat diikuti oleh semua yang tertarik pada bidang ini. Selain itu juga dapat diikuti oleh semua yang ingin mengatahui dan mendalami tentang bidang ini.

Instruktur

Instruktur dalam Pelatihan dan Training ini akan dibawakan oleh seorang yang ahli dalam bidang ini.

Metode

1. Presentasi

2. Diskusi antar peserta

3. Studi kasus

4. Simulasi

5. Evaluasi

6. Konsultasi dengan instruktur

 

Jadwal Pelatihan Lokal Media Training 2021 :

5-7 Januari 2021 | 19-21 Januari 2021 | 26-28 Januari 2021

9-10 Februari 2021 | 23-25 Februari 2021

9-11 Maret 2021 | 23-25 Maret 2021

6-8 April 2021 | 20-22 April 2021 | 27-29 April 2021

4-6 Mei 2021 | 11-13 Mei 2021 | 18-20 Mei 2021 | 25-27 Mei 2021

8-10 Juni 2021 | 22-24 Juni 2021

13-15 Juli 2021 | 20-22 Juli 2021

3-5 Agustus 2021 | 24-26 Agustus 2021

7-9 September 2021 | 21-23 September 2021

5-7 Oktober 2021 | 19-21 Oktober 2021

9-11 November 2021 | 23-25 November 2021

7-9 Desember 2021 | 14-16 Desember 2021 | 21-23 Desember 2021

Jadwal Pelatihan Lokal Media Training 2022 :

18 – 20 Januari 2022 | 25 – 27 Januari 2022

8 – 10  Februari 2022 | 15 – 17 Februari 2022 | 22 – 24 Februari 2022

2 – 4 Maret 2022 | 8 – 10 Maret 2022 | 15 – 17 Maret 2022 | 22 – 24 Maret 2022  | 29 – 31 Maret 2022

5 – 7 April 2022 | 19 – 21 April 2022

10 -12 Mei 2022 | 17 – 19 Mei 2022 | 24 – 26 Mei 2022

7 – 9 Juni 2022 | 14 – 16 Juni 2022 | 21 – 23 Juni 2022 | 28 – 30 Juni 2022

5 – 7 Juli 2022 | 12 – 14 Juli 2022 | 26 – 28 Juli 2022

2 – 4 Agustus 2022 | 9 – 11 Agustus 2022 | 23 – 25 Agustus 2022

6 – 8 September 2022 | 13 – 15 September 2022 | 20 – 22 September 2022 | 27 – 29 September 2022

4 – 6 Oktober 2022 | 11 – 13 Oktober 2022 | 18 – 20 Oktober 2022 | 25 – 27 Oktober 2022

1 – 3 November 2022 | 8 – 10 November 2022  | 15 –  17 November 2022 | 22 – 24 November 2022

6 – 8 Desember 2022 | 13 – 15 Desember 2022  | 20 – 22 Desember 2022 | 27 – 29 Desember 2022

TEMPAT PELAKSANAAN PELATIHAN

  • REGULER TRAINING
    • YOGYAKARTA
    • JAKARTA
    • BANDUNG
    • MALANG
    • SURABAYA
    • BALI
    • LOMBOK – NTB
  • IN HOUSE TRAINING
  • ONLINE TRAINING VIA ZOOM

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan Lokal Media Training:

  1. Investasipelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta
  2. Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Lokal Media Training:

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  2. FREE Akomodasi ke tempat pelatihan bagi peserta
  3. Module / Handout
  4. FREE Flashdisk
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training)
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner
  9. FREE Souvenir Exclusive
  10. Training room full AC and Multimedia